LC UPC Fiber Optic Attenuator

LC/UPC Fiber Optic Attenuator are used to lower the optical strength of your Fiber Signal.

LC UPC Fiber Optic Attenuators Features
1dB,2dB,3dB... to 30dB, typical 5dB, 10dB 15dB
inline design is easy to use (plugs between existing fiber jumper & equipment)
affordable & cost effective
LC/UPC connector
UPC Polish Connector
Rohs Compliant
High Quality Return loss 60db or Greater
Dual wavelength (1310nm/1550nm)

LC UPC Fiber Optic Attenuators Benefits
Precise attenuation level
Portable
Attenuators marked with attenuation level
LC UPC Fiber Optic Attenuator Applications
Test & Measurement
Telecommunications
Diagnostics
R&D

LC/UPC connector is a small form-factor fiber optic connector, it is widely used for densely installation. The LC/UPC fiber optic attenuator has good performance and is highly favored for singlemode .We are LC UPC fiber optic attenuator manufacturer, we offer fast delivery and custom made service. 

Common Fiber Optic Attenuators

LC 5dB Fiber Attenuator

LC 10dB Fiber Attenuator

LC 15dB Fiber Attenuator

LC 20dB Fiber Attenuator

LC/APC 5dB Fiber Attenuator

LC/APC 10dB Fiber Attenuator

LC/APC 15dB Fiber Attenuator

LC/APC 20dB Fiber Attenuator

$17.95

SM Attenuators all Cost is $17.95

*MM Attenuators Cost is +$12.00

BULKHEAD FEMALE TO FEMALE ATTENUATORS

Fibertronics offers bulkhead attenuators,  available in 5,10,15 and 20 dB attenuation levels..  Select from 1310 or 1550nm.

VARIABLE AIR GAP ATTENUATOR

The Air-Gap Variable Attenuator has a ceramic alignment sleeve that provides a low insertion loss of .15dB and can be used on both multimode and Singlemode applications. Included tool provides ability to increase attenuation level to desired “level”.  Device may replace mating sleeve at the patch panel, enabling variable attenuation levels to be introduced to the system.  Attenuation range is 0dB to 20dB. # DESCRIPTION

This Variable Attenuator uses collimator lens technology enabling the user to change attenuation through the twist of a top mounted screw. Use this variable attenuator to simulate the loss in a fiber system or testing your system’s dynamic range.  A power meter and light source can be used to determine the fixed attenuation value your system requires. The attenuator has a 0.8dB typical insertion loss and is available in a 2 meter length and may be connectorized. A low back reflection style is prepared with ultra PC connectors maintaining the internal low back reflection characteristics. Attenuation range: 0.8dB to 80dB.PART # DESCRIPTION PRICE

VARIABLE ATTENUATORS

In-Line fixed attenuators are available in various lengths and connector types.  The are assembled by customer order so the operating wavelength must be stated when ordered.  Available in 5, 10,15 and 20 dB levels.  Priced by final length. Call for quote. PRICE

IN-LINE ATTENUATORS

Reliable, Consistent, Quality

Reliable, Consistent, Quality

Catalog in PDF

Toll Free (877)-320-3143

Call  (321)-473-8933

Sales@fibertronics.com

Reliable, Consistent, Quality

Sales@fibertronics.com