Mode Conditioning Cable

 

Fibertronics supplies Mode Conditioning Cable, SC, FC, ST, MT-RJ, LC, Fiber Optic Mode Conditioning Patch Cord Cables. Fiber optic patch cord, single mode, multimode, SC, FC,ST,LC,MU,MTRJ,UPC,APC,simplex,duplex,9/125,50/125,62.5/125.

 

 

 

 

 

 

Fibertronics Mode conditioning cable are designed for Gigabit Ethernet multimode applications at 1300nm wavelength; the application standard is IEEE 802.3z. All mode conditioning fiber optic patch cords are made with duplex cable; with a single mode to multimode offset fiber connection part in one of the two legs, as you can see the real cable pictures on our PDF catalogue.

Here is the reason we need to use the mode conditioning patch cord : the Gigabit Ethernet application standard requires the use of fiber optic light to achieve the specified data transmitting rates. Usually people use long wave transceiver modules for Gigabit Ethernet, these modules have to operate both single mode and multi mode fibers. And as we know, multimode fiber manufacturing techniques create index of refraction anomalies along the centerline of the multi mode fiber core. When a highly concentrated single mode fiber optic light is sent into the center of a multimode fiberglass, the modes that propagate through the index of refraction anomalies spread out in time causing modal dispersion, this effect is called differential mode delay. Differential mode delay results in reduced bandwidth over distance. By allowing the single mode laser launch to be offset away from the center of the multi mode fiber the mode conditioning patch cord reduces the effect of such differential mode delay.

From the above descriptions we learn how to use such mode conditioning cables: when we use such mode conditioning fiber optic patch cords, we need to connect the yellow leg which is the color of single mode to connect the transmit side of the equipment (single mode Gigabit transceiver) while we connect the orange leg which is the color of multimode to the receive side. (Multimode Gigabit cable plant)

Mode conditioning fiber optic patch cord are used typically when you want to run Gigabit Ethernet (LX) over some multi mode fiber optic plant. Fibertronics Limited mode conditioning fiber optic cable are compliant with IEEE 802.3Z standard.  Fibertronics supply mode conditioning cables in various combinations of SC, ST, MT-RJ and LC with very short lead time.

Hybrid Connector Options

Any Fiber Optic Connector combination can be provided at little to no extra cost.

Any Fiber Optic Cable 3.0mm, 2.0mm, 1.8mm, 1.6mm, 900um, 250um can be provided at little to no extra cost. 

 

Call or e-mail us for a quick quote. 

 

Reliable, Consistent, Quality

Catalog in PDF

Reliable, Consistent, Quality

Toll Free (877)-320-3143

Call  (321)-473-8933

Sales@fibertronics.com

Reliable, Consistent, Quality

Sales@fibertronics.com